The SEAS A26 is an amazingly musical kit of speakers as it is. But part of being an audiophile is the never-ending quest of taking something great and making it even better.
Earlier I wrote about two modifications I incorporated in my SEAS A26 build. First, I added bracing to stiffen the enclosure and support the magnet system. Second, I lined the interior with damping felt. These two improved the transient response and lowered resonance.
Since then my SEAS A26 build has undergone two more modifications. Let us get down to it!
Quick improvement by adding 0.68 mH as a 2nd order to the tweeter — Significantly better tweeter power handling, on-axis response, driver phase still being ok. The XO point is pretty much defined by the woofer’s LP response, the only issue left being the tweeter’s HP and padding.
Remember, resistor R1 serves to attenuate the tweeter. By default this is 10 Ω. More on that later.
Wait, what — turning the beautifully simple first order high pass filter of the SEAS A26 into a second order one? Changing the very thing that makes it shine?
Well, not to worry. Be sure though to separate what a filter is electronically and what it is acoustically. There is no denying that this is a second order filter electronically. But as the following frequency response graph shows, acoustically it remains first order:
At this point you might be wondering what the fuss is all about. Why do this mod exactly? Well, as user Dissi points out:
The woofer of the A26 speaker actually is a bit too loud in the range from 600 to 1100 Hz. The tweeter is of opposite phase there and brings the level down by 2 dB. That’s how the original works.
But goes on to add:
With an additional inductor in the tweeter filter this doesn’t happen anymore and the hump at 900 Hz might become a problem.
All this piqued my interest.
Re-Engineering the Filter
I created a simulation of my own using Boxsim. I do like that software because of its optimization functionality, where it calculates different component values to meet a certain optimisation target such as phase or frequency.
Optimizing for overall balance and the default R1 resistor value of 10Ω, Boxsim calculated a 1 mH 0,41 Ω inductor. I ordered two 1 mH Jantzen Audio air coils 18AWG. The direct current resistance of these coils is 0,48 Ω. This is just north of 10% of the T35C002 tweeter’s resistance of 4,6 Ω, which is a good rule of thumb for component matching.
For a 12 Ω resistor R1, Boxsim calculates 0,97 mH with 0,42 Ohm DCR. Optimizing both R1 and L1, Boxsim actually calculates both this 12 Ohm resistor and 1 mH inductor. This lowers sensitivity from 10 kHz onwards somewhat. Psycho-acoustically, this this may sound warmer with less air. At that time, I preferred the flatter frequency response curve that the 10 Ω resistor provides.
Enough engineering, on with the results! I modeled the A26 again, this time in XSim. This allows to plot the stock A26 and modified A26 in one frequency response plot:
Contrary to earlier concerns, it seems that the coil actually decreases the hump around 900 Hz. Also it increases sensitivity from 2,2 up to 10 kHz. This matches with my subjective findings that the SEAS A26 now has more air, overall brightness while still retaining that warm 70’s bass. Well recommended.
SEAS A26 Loudspeaker Stands
The T35C002 tweeters should be at listening height. Like most tweeters they have a pretty steep the further off-axis you go:
I never got around to putting my A26’s on good stands. But the new owner has.
Wait, what — again?You sold these beauties? Yessir I have. More on that later, in another post. For now I am real glad that they have found a new home with a standout audio enthusiast. And I am here to report on them.
Le Viagra Soft Tabs 50mg ou 100mg sont des soins qui peuvent être pris contre l’impuissance et pour traiter les dysfonctions érectiles. Le Sildenafil est la fondation du Viagra Soft Tabs, il est aussi le même ingrédient qui entre dans la composition du Viagra Original sans ordonnance. Le Viagra Soft Tabs sont des comprimés à mâcher qui ont un goût succulent de menthe poivrée. Les comprimés Viagra Soft peuvent aussi être absorbés de manière plus discrète et ces effets sont bien plus rapides que celles des tablettes Viagra Original. Acheter du https://pharmacie-pilule.com/medicament/acheter-en-ligne-viagra-soft-tabs.html et respectez la notice de celui-ci.
Here is what the new owner did:
I created stands, filled with sand, 35 kg a piece, spikes underneath, and put the speakers on them with theraflex putty. They even sound much better, the bass is a real experience, a feast to listen to. Now for a paint job!
Having decided to build my DIY power amplifier, I spent quite some time deciding on which one. Deciding factors were the following:
Heat dissipation. To obtain an acceptable Wife Acceptance Factor, I realized that the complete package should fit in my media furniture, in a slit beside my slimline Marantz amplifier with little ventilation. So I quickly turned to class D amplification, renowned for its high efficiency.
Brand. This was a no-brainer. When it comes to class D technology, Hypex reigns supreme. Catering to renowned brands such as NAD and Marantz for their high-end series, they also provide the DIY community with top-of-the-line amplifier modules and power supplies.
Power. The SEAS A26 8Ω woofer is rated for 80W long-term and 300W short-term, while its 6Ω tweeter is rated a whopping 100W long-term and 250W short-term. I mostly listen at -40 dB so I don’t really need that much power, though I appreciate the headroom for sudden loud passages. Hypex’ UcD180HG delivers 120W into 8Ω loads and that seems fine to me.
Cost. Hypex carries two amplifier topologies: the best-in-class NCORE and former champion UcD. Most prominent differences are the order of the feedback loop, discreetness of the input buffer, and ultimately, cost. The difference is not subtle: €325 for a NC400, €100 for an UcD400HG, and €70 for the Hypex UcD180HG that would suffice power-wise.
My pockets led me to the Hypex UcD180HG with HxR voltage regulators. Power stability is key in audiophile applications. And these have a Power Supply Rejection Ratio of a whopping 110 dB!
Let us put this in perspective. Many well regarded regulators specify their maximum PSRR at 80 dB or so. These boys are 30 dB better — that is 31,6 times higher rejection. At a €30 premium for an HxR, that is exactly what those UcD’s are getting.
Powering the UcD180HG
Having gone with Hypex amplifier modules, it only made sense to also settle for a Hypex power supply. Hypex recently moved from linear power supplies to switching mode power supplies made specifically for audiophile applications.
The entry-level Hypex SMPS400A180 delivers a maximum of 400W at 20Hz or 600W into a resistive dummy load. That’s more than enough for two UcD180HG amplifier modules.
Yet here I spent a long time deciding whether I would opt for a single, shared power supply or two separate ones. The latter would offer more headroom and improve stereo crosstalk. Alas, at over €100 a piece (and forgoing more complex grounding in a single chassis) I settled on a single SMPS.
Invaluable too are Hypex’ application notes on insulation and signal wiring. Reading the paper on “audio ground” was especially enlightening. It is a bit of a wonder actually to be seeing so many grounding and humming issues when the solution is so clear and easy.
To get everything off the ground, I decided on a Class II insulated design and ordered a two-prong IEC inlet and Schuko cable.
Finally, I bought two standard Hypex RCA-RCA interlink cables. At nearly €100 each I thought they were pretty steep. The high-grade variants would even be over €160 a piece! I am not one for the fairy dust cable camp; when equipment is stacked or directly next to each other there really is very little in the way of EMI. Especially in a home environment.
Bypassing input capacitors on the UcD180HG
Unlike the NCORE, the Hypex UcD180HG modules are notDC-coupled. Meaning they have capacitors in the input signals to block direct current from being amplified and potentially damaging any speakers.
Sounds good, no? Actually, probably not — most modern sources do not output dangerous DC offsets. On the flip side, capacitors in the signal path do degrade audio quality.
Subjective preferences aside, I am all for “as little as possible components in the audio path” to maintain neutrality. Components will influence the signal one way or another — coils and capacitors especially. My ideal amplifier is neutral. It reproduces the signal faithfully, as if it were a wire with gain. Even the most boutique capacitor will color the sound.
Moral of the story is: I bypassed the input capacitors by soldering a jumper wire on the back of the boards. But not before listening on a bench setup, before mounting them into a chassis. And indeed, this modification does breathe air and dynamics into the sound.
Putting it all together
I sent the chassis backplate to Schaeffer in Germany to have it milled for connectors and labeling. Their Front Panel Designer software rocks. I think I got the plate back in a week or so, screw holes tapped and all. All connectors fit to a tee.
In the back panel I had also design through-holes to mount the Hypex UcD180HG heatsinks. Applying a small amount of thermal paste between the heatsinks and back panel, the modules now have the entire chassis to dissipate heat.
The layout of the chassis is such that there is no crossing of audio signal and power supply wires. Regardless, I diligently braided all cables for minimum electromagnetic interference, and moved the switching-mode power supply as far away from the amplifier modules as possible.
The SMPS board requires one metal spacer that should be connected to the chassis as a ground breaker. As the anodized aluminium does not conduct, I sanded the contact point until I measured 0Ω between that point and the RCA connectors.
Real happy with the result! One bit of self-criticism: I should have used heat shrink tubing on the mains power cable.
I built this amp in a quest for greater clarity and wider soundstage. And surely, the Hypex delivered.
First is an absolutely powerful, controlled bass. It is not that it is tighter or more bellowing, but something harder to put into words… a powerful rendition of what was recorded, keeping the woofer in check where it otherwise would have strayed ever so slightly of the amp’s signal.
This bass control is well spoken of on various forums but is something to be heard for yourself. Technically, it is rooted in Hypex’ unique load independence over the full range with heaps of global feedback. And it works.
The SEAS A26 can be driven to pretty hefty levels and the Hypex UcD180HG does so seemingly without effort. Not just the bass but across the board it is clear that this amp keeps the drivers exactly where it wants them to be.
Finally, noise is a thing of the past. Dial the volume knob all the way up without hooking up a source — no white noise, black as the night. And as for A/B testing: take out this power amplifier, and notice the hiss on the Marantz.
Only downside to every audio upgrade? There is always a new weakest link to upgrade. Onto replacing the Marantz with a proper DAC and line stage!
Building this SEAS A26 kit is a real trip down memory lane. My dad picked up a pair of Cabasse SAMPAN speakers in the 70s and so has literally played through them ever since I can remember. I just love the sound of them: warm and grand, sometimes bordering on bombastic, but ever so immersive.
I have longed for a pair of big-sounding vintage speakers ever since. But what to do when a set of floor-standers would not meet the Wife Acceptance Factor?
Introducing the SEAS A26
The SEAS A26 is a Do-It-Yourself kit for 28 liter monitors. The kit is a 21st century remake of the Dynaco A25, a legendary speaker in its time. More importantly, this set of largish monitors features an aperiodic port, that should make them sound larger than they are.
This was exactly the fun Do-It-Yourself project that I was looking for.
Woodwork for the SEAS A26
The front baffle calls for precision, so I had the baffles CNC’ed (computer-routed) by Kees of TechGraphix. An enormous audiophile himself, he even created his own CNC machine. Now that is DIY.
The SEAS A26 plans do not specify how to attach the sides of the enclosure, so I mitered all edges 45 degrees for a seamless fit, as seen in Loudspeaker Magazine’s A26 build. My neighbor owns a high-quality table saw and was kind enough to help.
I glued the sides with wood glue, held them with a corner band strap, and filled any holes with MDF filler.
The cabinet is intended to remain closed, so I decided against drilling through holes to attach the drivers with nuts & bolts. Instead I pre-drilled 3 mm holes for use with 4 mm wood screws later on.
High Pass Filter for the SEAS A26
Although SEAS touts the crossover as a first order crossover, it really just is a high pass filter to the T35C002 tweeter. The A26RE4 woofer has such a smooth roll-off that it the amplifier drives it directly. Here, less really is more, and I admire its simplicity.
In the filter design above, I added a bypass capacitor as a small tweak. The components are as follows:
Getting down to soldering, I always have a great time even though I do not do it much. I learned that my cheap 30W soldering iron lacks the energy to quickly melt 96/4 tin/silver solder. And so the result is not the prettiest, but does survive a good pulling and prodding. Here is a picture of a finished filter:
I hot glued the resistor and two capacitors to a 12 mm MDF board, and tie-wrapped the main capacitor and resistor for extra strength. The open tie-wraps are for the internal speaker cables. They serve as strain relief for the solder joints.
Enclosure Bracing for the SEAS A26
SEAS recommends to brace the enclosure to enhance the performance. Research of enclosure materials supports that claim. For unbraced 18 mm MDF, his research shows the following resonant frequencies:
Now compare that to braced 18 mm MDF:
Much better! Gone is that first sweeping resonance. Others move up in frequency and are attenuated by as much as 14 dB. They extinguish faster too, except the one at 1200 Hz.
I settled on the bracing design of the World Designs A25 speaker kit, another remake of the Dynaco A25. That design supports the woofer’s magnet too, thereby improving its transient response.
The bracing consists of a horizontal brace that intersects two vertical braces. Although the dimensions of the World Designs A25 differ from those of the SEAS A26, the construction plans to the bracing were easy enough to modify.
The following drawings are for 18 mm MDF. The plans to the SEAS A26 call for 19 mm, but that size is not readily available where I live.
The two vertical braces:
The diameter of the hole and corner radius allow for a few mm tolerance. I used a 57 mm hole saw, which still left a few mm for the “bump back” part of the magnet.
The horizontal brace:
The one critical dimension is the distance between the bottom vertical brace and the front baffle. This is 84,5 mm not accounting for any gaskets. I settled on 84,0 mm to account for my MONACOR MDM-5 foam sealing tape.
Enclosure Damping for the SEAS A26
The next question I pondered was how to damp the enclosure. I thought to ask SEAS themselves. Sure enough, none other than Håvard Sollien, R&D manager and designer of the A26 was kind enough to offer his advice:
It’s a good thing to line the interior with felt or wool. This is of course in addition to the polyfill damping that should be evenly distributed in the box.
Double-checking my bracing ideas:
I’m not sure how much sonic difference the extra bracing does in this cabinet, but it’s good to stiffen the cabinet and support the magnet system.
Awesome customer service. I really feel that Håvard went beyond the call of duty here. Much appreciated!
Following Håvard’s advice, I decided to line the sides with DAMPING10 felt. Although DAMPING30 would damp better, I could not justify its price.
It took real tinkering to get the protective sheet off of the self-adhesive layer. I thought that was pretty poor, especially considering the steep price for something made of recycled felt.
The picture below shows the bracing, damping and filter from the top:
To maximize the damping on the back, I mounted the filter board on two risers and fitted felt between them. The risers are simple pieces of 18 mm MDF glued together.
Binding Posts & Cabling
The SEAS A26 plans for a terminal hole in the back, but who needs one when you can have binding posts? The gold-plated Jantzen Audio M6/27 binding posts are airtight without the plastic. Just drill two 6,5 mm holes, 19 mm apart, and tap the bindings posts into place.
The following picture, taken from the bottom, shows the protruding binding posts, internal cabling and the filter:
The cables are Jantzen Audio twisted solid-core 6N cables, 6N meaning “six nines” or 99,9999% oxygen-free copper. The isolation is thick, the cables sturdy, and their purity should guarantee a long life, free of oxidation.
The thickness to the woofer is 1 mm² (17 AWG), to the filter and tweeter 0,5 mm² (20 AWG). That may sound small, but mind you: these cables are solid core, not stranded, so the actual amount of copper is relatively larger.
Finally, I used Intertechnik BS05G gold-plated banana plugs to connect the external speaker wire to the binding posts.
Enclosure Stuffing for the SEAS A26
I used black Sonofil as polyfill stuffing, 50 grams on the inside and 12 grams in the aperiodic port. Contrary to what is written in Loudspeaker Magazine, Sonofil sheets weigh 50 grams, not 62, so you need two bags.
With the bracing in place, dividing the Sonofil evenly is as easy. I calculated the amount of Sonofil per “quarter”, cut the sheets to size and weight, then glued them to the bracing. The 50 grams are divided as follows:
Bottom-back: 27 grams
Bottom-front: 12 grams
Top-back: 8 grams
Top-front: 3 grams
As for the aperiodic port damping, I did not fancy the looks of some sort of improvised grille. Instead, I cut a 23 cm piece of Sonofil to weight, rolled it up, and glued it in the port with transparent hobby glue.
In the picture above, the bottom brace has stuffing attached on both sides. The back side is fully covered, the front has two strips from top to bottom. The top brace has a sheet on the back side, while the front stuffing is lying on the horizontal brace. I fixed all sheets in place with hobby glue.
Though the instructions are in Dutch, the idea is simple enough to grasp, but hard to get right. First, putting the silicone layer on layer is sure to leave unsightly air cavities. Keeping the kit gun center prevents that, but may not fill the entire cube.
Second, it can easily take two weeks for the cube to dry, and then some. I found that the bottom half would not dry without a hole in the bottom of the cube. I suggest that you drill holes beforehand.
I have subjectively listened to the speakers in three configurations: first directly on the hard wooden floor, then separated by a sheet of DAMPING10 and finally with the silicone feet. I can attest to a noticeably tighter bass when using the feet.
Measuring the SEAS A26
Loudspeaker Magazine posted the measurement diagrams with their review of their A26 build. Given that I have used bracing, damping and higher quality filter components, my build should sound even better.
My amplifier is a Marantz NR1602. With seven discrete 50W channels, it is no power beast, but more than enough to fill my 26 m² living room. I play music with the following Audyssey settings:
I turned and pitched the speakers so that they directly face the primary listening position on the sofa.
Finally, I let the Mundorf capacitor break in for an hour or ten. I had not expected that to be necessary, but it was. Though the speakers sounded great on first listen, their midrange seemed to have collapsed the day after. Playing a variety of material opened them up again.
There is a great sense of musicality to these speakers. Treble is extended, with great clarity and air. I literally rediscovered some recordings that I thought I knew. Cymbals, snares and all sorts of other percussion sound snappy and precise. The T35C002 is the première driver on the A26, and it shows.
The bass response of the woofer is as good as my Klipsch Sub 8 was, and sits in well with the rest of the music. It is tight, deep and much more well-behaved and rounded than the Sub 8. Playing guitar virtuoso Steve Vai’s bellowing Warm Regards shows off the deep, round bass that this woofer is capable of.
The soundstage is much wider than the speakers are apart physically. This really shows in a good drum stereo mix, such as the opening to the 30-minute Stranger In Your Soul epic by progressive rock supergroup Transatlantic. The height is fairly level, as expected of monitors.
These speakers have a sweet spot for blues, country and jazz. Candy Dulfer’s saxophone sounds sweet and soothing. Eric Clapton’s “Chronicles”, B.B. King’s “Deuces Wild” and Willie Nelson’s “Milk Cow Blues” sound full and captivating. That is another characteristic of these speakers: a complete lack of listening fatigue.
The A26’s do need high quality recordings. The “Three Tenors in Concert” recording, capturing Carreras, Domingo and Pavarotti iconic open air opera performance in Rome, sounds distant and thin, as if it was captured by a mobile phone in the audience. This is not the fault of the A26’s, but a unforgivingly precise reproduction of a mediocre recording.
This speaker project turned out as a great success. The A26’s sure are the best speakers that I have ever owned. Compared to my dad’s SAMPAN’s, they sound tighter and more accurate, though not as majestic. These are high-end monitors, musical and spacious, hi-fi every way you look at it.
As definitive proof, even my wife admits to enjoy their musicality. And who would have thought: she even likes their looks without a grille. I dare say that I will never buy speakers again. DIY is here to stay!